The 9500MXC Microwave Radio System comprises the 9500MXC Node and the 9500MXC Terminal. Both are split-architecture radios with an antenna-mounted outdoor unit and a rack-mounted indoor unit. The 9500MXC Node is a new concept, providing multiple PDH and SDH point-to-point radios, with Fast and Gigabit Ethernet options, on a single product
platform, to form a complete network node for star or ring configurations on frequency bands from 6 GHz to 38 GHz.
The 9500MXC Terminal is optimized for installations where there is no requirement to migrate beyond 16xE1, non-protected. It is intended for use at spur sites from an 9500MXC Node and for basic low-cost single link applications on frequency bands 7 GHz to 23 GHz.
Link for this document:
ALU 9500 MXC - User Manual
MINI-LINK is the world’s most deployed microwave transmission system. MINI-LINK CN 500 is a high-performance indoor terminal in the MINI-LINK family. It houses modem functions, control functions and front traffic interfaces providing native Ethernet and PDH transport in 1+0 and 1+1 radio protection configurations. It also provides enhanced features such as Adaptive Modulation over Hybrid Radio Link.
MINI-LINK CN 500 is a compact terminal optimized to operate in multi-vendor networks and as end node in a MINI-LINK TN network. It is compatible with MINI-LINK TN over the air interface (MMU2 H). The capacity can be upgraded via HW license keys, which enables flexible increase of capacity during network expansion.
Link for this document:
Ericsson MINI-LINK E CN500 ETSI - Technical Description
This manual contains information on how to install a MINI-LINK E hop. MINI-LINK E is a microwave radio link for digital transmission. It consists of an indoor Access Module Magazine (AMM) with plug-in units and an outdoor radio unit with an antenna.
The system can be configured to meet any network requirements for capacity and range. It provides radio transmission links from 2 up to 17x2 (34+2) Mbit/s, operating within the 7 to 38 GHz frequency bands. Terminals can be configured as unprotected (1+0), protected (1+1) or for ring protection.
Link for this document:
Ericsson MINI-LINK E - Installation Manual
This document provides a general description of the MINI-LINK SP 110 (formerly MINI-LINK CN 1010). The MINI-LINK is the world's most deployed microwave transmission system.
The MINI-LINK SP 110 is a Layer 2 cell site gateway, which can be used for ETSI and ANSI systems. It is used at the end of nodes to consolidate the traffic from the complete physical site (2G, 3G, LTE) into a fiber-based aggregation network, complementing the microwave access.
Link for this document:
Ericsson MINI-LINK SP110 - Technical Description
After successful completion of this course, you should understand:
- Identify and localize the system functions into the TMN
- Describe the system architecture
- Login, start the TMN-OS icon, start the main applications of the 1353NM
- Create a network topology including Q3, 1850TSS and SNMP NEs
- Supervise a Q3, 1850TSS-320 and SNMP Network Element
- Perform the basic management operations on Q3, 1850TSS-320 and SNMP NE Management
- Handle the AS application for current alarms and the alarm history
- Manage the transmission quality records
- Perform the basic administration tasks in the operator field
Link for this document:
ALU 1353NM R7.4B Operation - Training Manual
This chart details the standard procedure for rack installation floor preparation. The two types of racks that can be installed are the standard rack and the seismic.
Link for this document:
ALU 9500 MPR - Installation Practices
This user's guide provides step-by-step procedures to help users perform tasks. Each procedure contains important introductory information that is essential to understanding and completing the task properly.
Link for this document:
ALU 9500 MPR - Operation and Administration
